Added support for Terasic DE10 Standard

Makefile

@@ -158,6 +158,72 @@ define FW_ENV_OPIPCPLUS_MENDER
 endef
 export FW_ENV_OPIPCPLUS_MENDER
 
+terasicde10standard: terasicde10standard-boot-cmd terasicde10standard-fw_env.config
+	tar xf u-boot-2018.05.tar.gz
+	$(MAKE) -C u-boot-2018.05 socfpga_de10_nano_defconfig
+	$(MAKE) -C u-boot-2018.05
+	mkdir /uboot
+	sfdisk --change-id /dev/$(ROOT_DEVICE) 1 a2
+	dd if=u-boot-2018.05/u-boot-with-spl.spf of=/dev/$(DISK)1
+	@echo "$$BOOTCMD_TERASICDE10STANDARD" > u-boot-2018.05/boot.cmd
+	u-boot-2018.05/tools/mkimage -C none -A arm -T script -d u-boot-2018.05/boot.cmd /uboot/boot.scr
+	$(MAKE) -C u-boot-2018.05 envtools
+	cp u-boot-2018.05/tools/env/fw_printenv /sbin/fw_printenv
+	ln -sf /sbin/fw_printenv /sbin/fw_setenv
+	@echo "$$FW_ENV_TERASICDE10STANDARD" > /etc/fw_env.config
+	/sbin/fw_setenv reset
+	rm -rf u-boot-2018.05
+
+terasicde10standard-boot-cmd:
+define BOOTCMD_TERASICDE10STANDARD
+load mmc 0:2 $${kernel_addr_r} boot/zImage
+load mmc 0:2 $${fdt_addr_r} boot/machine.dtb
+setenv bootargs console=ttyS0,115200 root=/dev/$(DISK)2 rootfstype=ext4 rootflags=discard rw rootwait elevator=noop quiet loglevel=3 systemd.show_status=1
+bootz $${kernel_addr_r} - $${fdt_addr_r}
+endef
+export BOOTCMD_TERASICDE10STANDARD
+
+terasicde10standard-fw_env.config:
+define FW_ENV_TERASICDE10STANDARD
+/dev/$(ROOT_DEVICE) 0x88000 0x20000
+endef
+export FW_ENV_TERASICDE10STANDARD
+
+terasicde10standard-mender: terasicde10standard-boot-cmd-mender terasicde10standard-fw_env.config-mender
+	tar xf u-boot-2018.05.tar.gz
+	$(MAKE) -C u-boot-2018.05 socfpga_de10_nano_defconfig
+	@echo "CONFIG_ENV_IS_IN_MMC=y" >> u-boot-2018.05/.config
+	$(MAKE) -C u-boot-2018.05 oldconfig
+	$(MAKE) -C u-boot-2018.05
+	dd if=/dev/zero of=/dev/$(ROOT_DEVICE) bs=512 seek=1 count=49151
+	dd if=u-boot-2018.05/u-boot-with-spl.spf of=/dev/$(DISK)1
+	@echo "$$BOOTCMD_TERASICDE10STANDARD_MENDER" > u-boot-2018.05/boot.cmd
+	u-boot-2018.05/tools/mkimage -C none -A arm -T script -d u-boot-2018.05/boot.cmd /uboot/boot.scr
+	$(MAKE) -C u-boot-2018.05 envtools
+	cp u-boot-2018.05/tools/env/fw_printenv /sbin/fw_printenv
+	ln -sf /sbin/fw_printenv /sbin/fw_setenv
+	@echo "$$FW_ENV_TERASICDE10STANDARD_MENDER" > /etc/fw_env.config
+	/sbin/fw_setenv reset
+	rm -rf u-boot-2018.05
+
+terasicde10standard-boot-cmd-mender:
+define BOOTCMD_TERASICDE10STANDARD_MENDER
+run mender_setup
+load $${mender_uboot_root} $${kernel_addr_r} boot/zImage
+load $${mender_uboot_root} $${fdt_addr_r} boot/machine.dtb
+setenv bootargs console=ttyS0,115200 panic=10 panic_on_oops=1 root=$${mender_kernel_root} rootfstype=ext4 ro rootwait elevator=noop quiet loglevel=3 systemd.show_status=1
+bootz $${kernel_addr_r} - $${fdt_addr_r}
+run mender_try_to_recover
+endef
+export BOOTCMD_TERASICDE10STANDARD_MENDER
+
+terasicde10standard-fw_env.config-mender:
+define FW_ENV_TERASICDE10STANDARD_MENDER
+/dev/$(ROOT_DEVICE) 0x400000 0x20000
+/dev/$(ROOT_DEVICE) 0x800000 0x20000
+endef
+export FW_ENV_TERASICDE10STANDARD_MENDER
+
 rpi3b: rpi3b-boot-cmd rpi3b-fw_env.config rpi3b-config
 	tar xf u-boot-2018.05.tar.gz
 	patch -Np1 -d u-boot-2018.05 < u-boot-2018.05-serial-number-fix.patch